Filter
Top Products
Sets the color phase. (-7 to +7)
Color Depth
Sets the color depth for each color phase. This function is more effective for chromatic colors
and less effective for achromatic colors. The color looks deeper as you increase the setting
value towards the positive side, and lighter as you decrease the value towards the negative
side. This function is effective even if you set [Color Mode] to [Black & White].
[R] -7 (light red) to +7 (deep red)
[G] -7 (light green) to +7 (deep green)
[B] -7 (light blue) to +7 (deep blue)
[C] -7 (light cyan) to +7 (deep cyan)
[M] -7 (light magenta) to +7 (deep magenta)
[Y] -7 (light yellow) to +7 (deep yellow)
Detail
Sets items for [Detail].
Level: Sets the [Detail] level. (-7 to +7)
Adjust: The following parameters can be selected manually.
Mode: Selects auto/manual setting. (Auto (automatic optimization) / Manual (The details
are set manually.))
V/H Balance: Sets the vertical (V) and horizontal (H) balance of DETAIL. (-2 (off to the
vertical (V) side) to +2 (off to the horizontal (H) side))
B/W Balance: Selects the balance of the lower DETAIL (B) and the upper DETAIL (W).
(Type1 (off to the lower DETAIL (B) side) to Type5 (off to the upper DETAIL (W) side))
Limit: Sets the limit level of [Detail]. (0 (Low limit level: likely to be limited) to 7 (High limit
level: unlikely to be limited))
Crispning: Sets the crispening level. (0 (shallow crispening level) to 7 (deep crispening
level))
Hi-Light Detail: Sets the [Detail] level in the high intensity areas. (0 to 4)
Copy
Copies the settings of the picture profile to another picture profile number.
MENU → (Camera Settings) → [Picture Profile] → [Copy]
Reset
Resets the picture profile to the default setting. You cannot reset all picture profile settings at
once.
MENU → (Camera Settings) → [Picture Profile] → [Reset]