Filter
Top Products
Although you can change the aperture value during the preview, the subject may be
defocused if you select a brighter aperture. We recommend that you adjust the focus
again.
[166] How to Use
Using shooting functions Setting the other functions of this product
Shot. Result Preview
With the monitor or viewfinder, you may see an image with an aperture that differs from the
shooting result. Since the blurring of a subject changes if the aperture is changed, the
blurriness of the actual picture will differ from the image you were viewing prior to shooting.
While pressing down the key to which [Shot. Result Preview] is assigned, you can check the
image preview with the DRO, shutter speed, aperture and ISO sensitivity settings applied.
Check the shooting result preview before shooting.
1. MENU → (Custom Settings) → [Custom Key Settings] → set the [Shot. Result
Preview] function to the desired key.
2. Confirm the image by pressing the key to which [Shot. Result Preview] was assigned.
Hint
The DRO settings, shutter speed, aperture and ISO sensitivity settings you have set are
reflected on the image for [Shot. Result Preview], but some effects cannot be previewed
depending on the shooting settings. Even in that case, the settings you have selected will
be applied to the images you shoot.
[167] How to Use
Viewing Viewing still images
Playing back images
Plays back the recorded images.
1. Press the (Playback) button to switch to the playback mode.
2. Select the image with the control wheel.
Hint