Filter
Top Products
(supplied). The InfoLITHIUM battery pack can be charged even when it is not fully depleted.
It can also be used when it is not fully charged. The charged battery pack discharges little by
little even when it is not being used. To avoid missing a shooting opportunity, charge the
battery pack again before shooting.
1. Insert the battery pack into the battery charger.
Push the battery pack lightly until it clicks.
2. Connect the battery charger to the wall outlet (wall socket).
Light on: Charging
Light off: Charge completed
Charging time (Full charge): Approx. 220 minutes
When charging a fully depleted battery pack at a temperature of 25°C (77°F).
The CHARGE lamp (A) turns off when charging is completed.
Note
The charging time differs depending on the remaining charge of the battery pack and on
the charging conditions.
Be sure to use only genuine Sony brand battery packs.
We recommend charging the battery pack at an ambient temperature of between 10°C to
30°C (50°F to 86°F). You may not be able to efficiently charge the battery pack outside
this temperature range.
Connect the battery charger to the nearest wall outlet (wall socket). If malfunctions occur
while using the charger, disconnect the plug from the wall outlet (wall socket) immediately
to disconnect from the power source.
Even when the CHARGE lamp of this battery charger is off, the power is not
disconnected. If any trouble occurs while this unit is in use, unplug it from the wall outlet
(wall socket) to disconnect the power.
When the camera is being used for the first time or when you use a battery pack that has