Filter
Top Products
Note
If the subject is closer than the minimum shooting distance of the lens, the focus cannot
be confirmed. Make sure you put enough distance between the subject and the product.
[83] How to Use
Using shooting functions Adjusting the exposure
Exposure Comp.
You can adjust the exposure under MENU when the exposure compensation dial is set to
“0.” Based on the exposure value set by auto exposure, you can make the entire image
brighter or darker if you adjust [Exposure Comp.] to the plus side or minus side, respectively
(exposure compensation). Normally, exposure is set automatically (auto exposure).
1. MENU → (Camera Settings) → [Exposure Comp.] → desired setting.
You can adjust the exposure in a range of –5.0EV to +5.0EV when the exposure
compensation dial is set to “0.”
Note
You can adjust the exposure in a range of –2.0 EV to +2.0 EV for movies.
If you shoot a subject in extremely bright or dark conditions, or when you use the flash,
you may not be able to get a satisfactory effect.
Only a value between –3.0 EV and +3.0 EV with the equivalent image brightness appears
on the screen when shooting. If you set an exposure beyond this range, the image
brightness on the screen does not show the effect, but it will be reflected in the recorded
image.
When the exposure compensation dial is set to other than “0,” settings for the exposure
compensation dial will be prioritized. For example, if you set [Exposure Comp.] to +5.0EV,
but the exposure compensation dial is set to +2.0EV, the “+2.0EV” setting will be
prioritized.
When you set the exposure compensation dial to “0” from a setting other than “0,” the
exposure value switches to “0” even if the exposure has been set to other settings.
When you use [Manual Exposure], you can compensate for the exposure only when [ISO]