Filter
Top Products
57
Troubleshooting
Troubleshooting
The recording date is not superimposed on an image.
• This camera does not have a feature for superimposing dates on images.
The screen is too dark or too bright.
• Adjust the brightness of the LCD backlight (page 46).
Dots appear and remain on the screen.
• This is not a malfunction. These dots are not recorded (page 3).
Your camera cannot playback images.
• Press (Play) button to change to the playback mode (page 25).
• The folder/file name has been changed on your computer.
• When an image file has been processed by a computer or when the image file was recorded
using a model other than that of your camera, playback on your camera is not guaranteed.
• The memory card may be damaged. Exchange the memory card for another one.
The date and time are not displayed.
• In the default settings in effect when you purchased the camera, DISP is set to AUTO. So
indicators on the screen disappear after about 5 seconds. If you want to make indicators
appear again, tilt the multi-selector to v (DISP) (page 23).
The image appears rough right after playback starts.
• The image may appear rough right after playback starts due to image processing. This is not a
malfunction.
The image does not appear on the TV screen.
• Check [Video Out] to see if the video output signal of your camera is set to the color system of
your TV (page 47).
• Check whether the connection is correct (page 51).
• If the USB connection support cable is connected to the camera and the computer, disconnect
it.
You cannot view the image or hear the sound on the TV.
• When you are using the component video plug, make sure the red and white plugs of the A/V
connecting cable are connected (pages 51, 52).
Viewing images