60
Warning indicators and messages
If the following messages appear, follow
the instructions.
• The battery level is low. Charge the
battery immediately.
For use with compatible
battery only
• The battery inserted is not an NP-BK1
(supplied) battery pack.
System error
• Turn the power off and then on again.
Camera overheating
Allow it to cool
• The camera temperature has risen. The
power may go off automatically, or you
may be unable to record movies. Leave
the camera in a cool location until the
temperature goes down.
Internal memory error
• Turn the power off and then on again.
Reinsert the memory card
• Insert the memory card correctly
(page 18).
• The inserted memory card cannot be
used in your camera (page 2).
• The memory card is damaged.
• The terminal section of the memory
card is dirty.
memory card type error
• The inserted memory card cannot be
used in your camera (page 62).
Cannot access memory card
Access denied
• You are using a memory card with the
access controlled.
Error formatting internal memory
• Format the internal memory again
(page 49).
Error formatting memory card
• Format the memory card again
(page 48).
memory card locked
• You are using the memory card with the
write-protect switch, and the switch is
set to the LOCK position. Set the switch
to the recording position.
No memory space on
internal memory
No memory space on
memory card
• Delete unnecessary images or files
(pages 26, 41).
Read only memory card
• Your camera cannot record or delete
images on this memory card.
No images
• No images that can be played back have
been recorded in the internal memory.
• No images that can be played back have
been recorded in this folder of the
memory card.
Folder error
• A folder with the same first three digit
number already exists on the memory
card (for example: 123MSDCF and
123ABCDE).
Messages