Filter
Top Products
12
3. INSTALLATION
Please follow the instructions and the diagram below to set up the system.
NOTE: The LAN CAMERA is linked by its Video Out connection via a BNC connector to a
monitor's Video In connection. If this connection is there, you can see some information
on the monitor screen, such as the LAN CAMERA factory default Static IP
address(192.168.1.168). But the LAN CAMERA Static IP address can only appear if
there is a connection between the LAN CAMERA and another device. If there is no such
connection, the LAN CAMERA factory default Static IP address will not appear on the
monitor screen.
3.1 CONNECTING WITH AN NVR
Use a crossover LAN cable to connect directly to an NVR.
SD Card
RS-232
ALARM
DC12V
AUDIOVIDEO
OUT
OUT
I/O
RS-485
ETHERNET
10/100
LAN CAMERA
CONNECT TO ETHERNET
RJ45 CONNECTOR
CONNECT TO NVR
ETHERNET PORT
3.2 CONNECTING WITH A DVR
SD Card
RS-232
ALARM
DC12V
AUDIO
IN
IN
OUT
OUT
VIDEO
TO
MONITOR
TO
MUX'S VCR IN
FROM MUX
MAIN MONITOR
I/O
RS-485
ETHERNET
10/100
LAN CAMERA
CONNECT TO VIDEO OUT
BNC CONNECTOR
CONNECT TO DVR
VIDEO IN