Filter
Top Products
49
Change the Application Setting — Alarm Application Enable Setting.
Please follow the steps below to change the setting via the network if necessary.
1. Click the Enable Alarm button on the left side of the record to enter the “Alarm Application
Enable Setting” page.
MJPEG mode MPEG4 mode
2. Click “Enable ALARM – UPLOAD Via FTP” to checkmark the attached box and activate the
function (MJPEG mode only).
3. Click “Enable ALARM – SAVE Into SD card” to checkmark the attached box and activate the
function.
4. Click “Enable ALARM – UPLOAD Via SMTP” to checkmark the attached box and activate the
function (MJPEG mode only).
5. Enter the "Alarm Duration" you have chosen.
6. Click the Submit button to submit the new setting of the recording.
7. Click the Home button to return to the home page.
Description of function keys:
Enable Alarm – Upload Via FTP: Activates or deactivates the alarm recording upload to the FTP.
Enable Alarm – Save Into SD card: Activates or deactivates the alarm recording to be saved to the
SD card.
Enable Alarm – Upload Via SMTP: Activates or deactivates the alarm recording upload to the
SMTP.
Alarm Duration: Predetermines the length of the alarm.