Filter
Top Products
44
5.1.5 Change the Application Setting
Please follow the steps below to change the application setting through the network if necessary.
Change the Application Setting — FTP Application Setting (MJPEG mode only).
Please follow the steps below to change the FTP setting via the network if necessary to upload recording
data live.
1. Click the Application button on the home page to enter the “FTP Application Setting” page
(default).
2. For storage setting, type in the respective required number of images you wish to set in the "Pre -
Alarm Memory Buffer" and the "Alarm Memory Buffer" in their corresponding blank spaces.
3. Enter the "Upload Rate" you have chosen.
4. Click "Submit" after each of the above entries for their setting.
5. Click the “Home” button to return to the home page.
Description of function keys:
Pre – Alarm Memory Buffer: Fixes the desired number of images to prelude an alarm.
Alarm Memory Buffer: Determines the selected length of the image buffer after an alarm.
Upload Rates: Sets the upload speed rate.