Filter
Top Products
100
Chapter 5 Settings
2
Click [Add] at the top right of the window.
The “Add Camera - Find By Address” screen appears.
3
Configure all the settings.
Camera Name
Enter the name of the camera to add.
Use only alphanumeric characters, underscores (_), and hyphens (-).
Camera Address
Enter the host address (IP address) of the camera.
Port
Enter the HTTP server port number of the camera. The default setting is 80.
Camera Administrator
Set the camera administrator.
User Name
Enter up to 16 alphanumeric characters for the user name of the camera
administrator.
Password
Enter up to 16 alphanumerical characters for the password of the camera
administrator.
Use Proxy
If the camera will be accessed via a proxy server, select this check box and
configure the following items.
Address
Enter the proxy server host address (host name).
Port
Enter the proxy server port number.
Caution
The user name and password of the camera administrator cannot be
modified from the NSR. To modify them, access the camera directly from
a Web browser on a computer.