Filter
Top Products
28
Chapter 2 Initial Configuring the System
Note
When using the NSR-100/50, connect the following devices to each of the
LAN ports.
LAN 1: Network cameras
LAN 2: Remote clients
LAN 3: External storage devices (This may not be supported depending on
the software version. For details, consult your dealer.)
10
To configure general settings, click [General Setting] and then [Select].
The [General Network Setting] screen appears.
11
Configure each item below, and then click [Accept].
Primary DNS
Enter the IP address for the primary DNS (Domain Name Server). Skip this
entry if a primary DNS is not available or not required.
Secondary DNS
Enter the IP address of the secondary DNS. Skip this entry if a secondary
DNS is not available or not required.
Default Gateway
Enter the IP address of the default gateway. Skip this entry when only a
local network is used or when connections to other networks are not
required.
Hosts Setting
If a host name needs to be registered in the hosts file, enter the IP address
and corresponding host name, and then click [Add] to add it to the list.
12
To configure each LAN port, click [Network Device] and then [Select].
Configure the “Network Device” settings for each of the LAN ports.
The [Network Device] screen appears.