Sony NSR-100 Security Camera User Manual


 
88
Chapter 5 Settings
Example: For the NSR-100/50
DNS
Displays the primary DNS and secondary DNS settings.
Network Device
Displays the following settings for the network devices.
When using the NSR-25, only the settings input for Network Device 1 are
displayed.
DHCP
This check box is selected when DHCP is set.
IP address
Displays the IP address for the network device.
Subnet mask
Displays the subnet mask for the network device.
Gateway
Displays the gateway for the network device.
e-Mail (SMTP)
The NSR has a function for sending a notification message to the registered
SMTP client address when an event occurs.
You can set the e-mail address of the recipient and other settings required for
sending messages in [e-Mail (SMTP)].
Note
To send e-mail notifications, action settings must be configured. For details, see
“Action” (page 131).
To configure e-Mail (SMTP)
1
Click [e-Mail (SMTP)] from the submenus of the “General” screen.