Sony NSR-100 Security Camera User Manual


 
34
Chapter 2 Initial Configuring the System
When you select [Traps]
Enable
Select this check box to enable SNMP traps.
Disable
Select this check box to disable SNMP traps.
Host IP Address
Enter the trap’s host IP address.
Community
Enter the SNMP community name in the check box.
Temperature Events
Select this option to be notified of irregular temperatures of the unit.
Voltage Events
Select this option to be notified of irregular voltage activity.
UPS Events
Select this option if you are connected to a UPS and that you want to be
notified of UPS power failures.
Power Events
Select this option to be notified when the NSR shuts down.
Fan Events
Select this option to be notified of irregular fan activity.
RAID Events
Select this option to be notified of RAID group rebuilds.
HDD Events
Select this option to be notified of hard disk malfunctions.
When you click [Accept], the [Setup Menu] screen returns.
26
Select the [UPS Settings], and then click [Select].
The [UPS Settings] screen appears.