Sony NSR-100 Security Camera User Manual


 
57
Chapter 4 Monitoring Live Images
Monitoring Window (Monitor 2)
When two monitors are connected to the NSR, a monitor layout specified as
1×1, 2×2, or 3×3 is displayed on the monitor connected to monitor connector 2.
You can use monitor 2 as a hot spot monitor.
The image displayed is the same as that of the monitor window selected in
monitor 1. However, if there is a sensor input or motion detection, the image
from the corresponding camera is displayed.
When two monitors are connected, the NSR operates as follows:
Selected images, or images from cameras with a sensor input or motion
detection event, are displayed in available monitor windows sequentially,
from top left to top right, and then bottom left to bottom right.
Images that are already displayed in a monitor window do not appear again in
a different monitor window.
Notes
You cannot control a camera for a monitor window directory from monitor 2.
You cannot perform configuration operations from monitor 2.
When images are displayed on monitor 2, the performance of monitor 1 may
decrease.
Monitor Window
A Camera name
Indicates the name of the camera.
Screen of Monitor 1 Screen of Monitor 2
12 3
4
5
76