Filter
Top Products
13
Getting Started
DCR-PC53E/PC55E 2-548-726-11(1)
Step 4: Adjusting the LCD panel
The LCD panel
Open the LCD panel 90 degrees to the
camcorder (), then rotate it to the best
angle to record or play ().
2
1
180 degrees
(max.)
90 degrees (max.)
DISP/BATT INFO 90 Degrees to the
camcorder
• Do not press the buttons on the LCD frame
accidentally when you open or adjust the LCD
panel.
• If you rotate the LCD panel 180 degrees to the
lens side, you can close the LCD panel with
the LCD screen facing out. This is convenient
during playback operations.
To darken the LCD screen
Press and hold DISP/BATT INFO for a few
seconds until appears.
This setting is practical when you use
your camcorder in bright conditions or
where you want to save battery power. The
recorded picture will not be affected by
the setting. To turn on the LCD backlight,
press and hold DISP/BATT INFO for a few
seconds until disappears.
• See [LCD BRIGHT] (p. 48) to adjust the
brightness of the LCD screen.