Filter
Top Products
24
DCR-PC53E/PC55E 2-548-726-11(1)
2
7 8
9
q;
qs
qa
Recording/playback
To check the remaining battery
(Battery Info) ..........................
Set the POWER switch up to OFF (CHG),
then press DISP/BATT INFO . The
battery information appears for about
7 seconds. With the information on the
screen, press the button several times to
view it for about 20 seconds (max.).
0% 50% 100%
BATTERYCHARGELEVEL
RECTIMEAVAILABLE
LCDSCREEN: 85min
BATTERYINFO
Remaining battery (approx.)
Recording capacity (approx.)
To turn off the operation confirmation
beep (BEEP) ...........................
See [BEEP] (p. 50) to set the operation
beep.
To use special effects ................
See (PICT.APPLI.) menu (p. 44).
To initialize the settings (RESET) ...
Press RESET to initialize all the
settings, including the setting of the date
and time.
(Menu items customized on Personal Menu
are not initialized.)
Other part names and functions
Speaker
Sounds come out from the speaker.
•
For how to adjust the volume, see page 21.
REC lamp
The REC lamp lights up in red during
recording (p. 50).
Remote sensor
Point the Remote Commander (p. 30)
towards the remote sensor to operate
your camcorder.
Internal stereo microphone
When an external microphone is
connected, the audio input from the
external microphone takes precedence
over others.
Functions used for recording/playback, etc. (continued)