Filter
Top Products
Saving and Loading Lens Files
138
Chapter 7 Saving and Loading User Setting Data
Use FILE >Lens (see page 129) in the setup menu
to set the data in lens files.
You can set the following data and save it as a
lens file.
See “Basic Setup Menu Operations” (page 94) for
information about menu operations.
To save a lens file to an S×S memory card, insert
the card into a memory card slot and then proceed
as follows.
See “Basic Setup Menu Operations” (page 94) for
information about menu operations.
1 Select FILE >Lens in the setup menu.
To assign a name to the data before saving
it
Assign a name before proceeding to step 2.
For details, see “To assign names to files”
(page 136).
2 Select Lens Store Mem or Lens Store
S×S, and press the MENU knob.
Select Lens Store Mem if you want to save
the data in the camcorder’s internal memory,
and select Lens Store S×S if you want to save
the data on an S×S memory card.
3 To execute the save, select [Execute],
and then press the MENU knob.
To cancel the save, select [Cancel], and
then press the MENU knob.
If you select [Execute], a list box of lens file
number appears. File numbers where “No
File” is displayed are empty file numbers.
4 Select the file number under which you
want to save the data, and then press the
MENU knob.
A confirmation message appears.
5 To execute the save, select [Execute],
and then press the MENU knob.
To cancel the save, select [Cancel], and
then press the MENU knob.
If you selected Lens Store S×S in step 2, the
ACCESS lamp lights when you execute the
save.
When the data has been saved to the S×S
memory card, a completion message appears
and the ACCESS lamp goes out.
To load a lens file from an S×S memory card,
insert the S×S memory card into a memory card
slot, and then proceed as follows.
See “Basic Setup Menu Operations” (page 94) for
information about menu operations.
1 Select FILE >Lens in the setup menu.
2 Select Lens Recall Mem or Lens Recall
S×S, and press the MENU knob.
Select Lens Recall Mem if you want to load
the file from the camcorder’s internal
memory, and select Lens Recall S×S if you
want to load the file from an S×S memory
card.
3 To execute the load, select [Execute],
and then press the MENU knob.
Saving and Loading
Lens Files
Setting Lens File Data
Setting data Sub-items
V modulation shading
compensation values
M V Modulation
Center marker position Lens Center H
Lens Center V
Flare level Lens R Flare
Lens G Flare
Lens B Flare
White balance
compensation value
Lens W-R Offset
Lens W-B Offset
White shading
compensation value
L R/G/B H Saw
L R/G/B H Para
L R/G/B V Saw
L R/G/B V Para
Saving Lens Files
Loading Lens Files