Filter
Top Products
Thumbnail Operations
90
Chapter 5 Clip Operations
1 In the thumbnail screen, select the
thumbnail of a clip, and press the
ESSENCE MARK button (see page 22)
or select THUMBNAIL >Thumbnail
View >Essence Mark Thumbnail.
2 The shot mark thumbnail screen
appears, and a selection list is displayed.
3 Select Shot Mark, Shot Mark1, or Shot
Mark2.
Shot Mark1: Display only frames marked
with Shot Mark1 marks.
Shot Mark2: Display only frames marked
with Shot Mark2 marks.
Shot Mark: Display frames marked with
either Shot Mark1 or Shot Mark2 marks.
Example shot mark thumbnail screen
(with Shot Mark selected)
The properties of the clip appear at the bottom of
the screen.
Except for the following item, the information
displayed here is the same as the information
displayed in the expand thumbnail screen.
a Timecode
This is the timecode of the selected frame in the
shot mark thumbnail screen.
In the shot mark thumbnail screen (see page 89)
or the expand thumbnail screen (see page 88),
you can add thumbnails to any frame of clips
recorded in HD mode, and delete recorded shot
marks.
To add shot marks
1 Select the frame where you want to add
a shot mark, and then select
THUMBNAIL > Set Shot Mark > Add
Shot Mark1 (or Add Shot Mark2).
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2 Select [Execute], and press the MENU
knob.
To delete shot marks
1 Select the frame where you want to
delete a shot mark, and then select
THUMBNAIL > Set Shot Mark >
Delete Shot Mark1 (or Delete Shot
Mark2).
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2 Select [Execute], and press the MENU
knob.
In the expand thumbnail screen (see page 88) or
the shot mark thumbnail screen (see page 89),
you can set the selected frame as the clip index
picture in HD mode.
1 Select the thumbnail of the frame that
you want to use as the index picture,
and then select THUMBNAIL >Set
Index Picture.
The properties screen of the selected frame
appears, and a confirmation message appears
below the image.
2 Select [Execute], and press the MENU
knob.
Note
Even if you set the index picture to a frame that is not the
first frame of a clip, playback of that clip from a
thumbnail screen always begins at the first frame.
Adding and Deleting Shot Marks
(HD Mode Only)
S1 S2 S2 S1
S1 S1
Changing Clip Index Pictures
(HD Mode Only)