Filter
Top Products
Thumbnail Operations
87
Chapter 5 Clip Operations
i Special recording information (HD
mode only)
This displays the mode of clips that have been
recorded in a special mode (Slow & Quick
Motion, Interval Rec, Frame Rec).
For Slow & Quick Motion clips, the frame rates
are displayed to the right as [Recording frame
rate/Playback frame rate].
j Timecode of the displayed image
k Timecode of the recording start point
l Timecode of the recording end point
m Duration
n Recorded audio channels
o Video format of recording
You can add OK marks to clips. This makes it
possible to display thumbnails of only the clips
that you need by pressing the THUMBNAIL
button.
Clips with OK marks cannot be deleted or
divided. If you want to delete or divide such a
clip, delete the OK mark first.
To add an OK mark
1 In the thumbnail screen, select
THUMBNAIL >Add OK Mark.
The screen changes to the clip properties
screen, and a confirmation message appears
beneath the index picture.
2 Select [Execute], and press the MENU
knob.
An OK mark is added to the selected clip.
To delete an OK mark
A Delete OK Mark item appears in the
THUMBNAIL menu when you have selected a
clip that has an OK mark.
1 In the thumbnail screen, select
THUMBNAIL >Delete OK Mark.
The screen changes to the clip properties
screen, and a confirmation message appears
beneath the index picture.
2 Select [Execute], and press the MENU
knob.
The OK mark is deleted from the selected clip.
You can copy clips to other S×S memory cards.
Clips are copied to destination S×S memory cards
using the same names as the original clips.
Notes
• If a clip with the same name already exists at the copy
destination S×S memory card, a one-digit number in
parentheses is added to the original name.
The number in parentheses is the smallest number that
does not exist at the copy destination.
Examples:
ABCD0002tABCD0002(1)
ABCD0002(1)tABCD0002(2)
ABCD0005(3)tABCD0005(4)
• If the parenthetical numbers (1) to (9) already exist at
the copy destination, it is not possible to copy any more
clips under that name. (A tenth clip cannot be copied.)
• A message appears if there is not enough free capacity
at the copy destination S×S memory card. Exchange
the card for one with more free capacity.
1 In the thumbnail screen, select the
thumbnail of the clip to copy, and then
select THUMBNAIL >Copy Clip.
The screen changes to the properties screen
of that clip, and a confirmation message
appears beneath the index picture.
2 Select [Execute], and press the MENU
knob.
The copy starts.
During the copy, an execution message and
progress bar are displayed.
When the copy finishes, the display returns to the
thumbnail screen.
To cancel a copy operation
Press the RESET/RETURN button.
The copy is cancelled, and the display returns to
the thumbnail screen.
Adding and Deleting OK Marks
(HD Mode Only)
Copying Clips