Filter
Top Products
Preparing a Power Supply
34
Chapter 2 Preparations
2 Slide the battery pack down until its
“LOCK” arrow points at the matching
line on the camcorder.
Note
If the battery pack is not attached correctly, the terminal
may be damaged.
To detach the battery pack
Holding the release button in, pull the battery
pack up.
Notes
• During recording and playback (while the ACCESS
indicator is lit), be careful never to remove the battery
pack.
• Make sure to power the camcorder off before replacing
the battery pack.
Mount an AC-DN2B/DN10 on the camcorder in
the same way as a battery pack, then connect to
the AC power supply.
The AC-DN2B/DN10 can supply up to 100 W of
power.
1BP-GL95/GL65/L60S/L80S
2Align these lines.
1“LOCK” arrow
2Matching line on the camcorder
Using AC Power
Release button
To an AC outlet