Filter
Top Products
123
Adjusting the focus
Shooting (Advanced operations)
When it is difficult to get the proper focus in autofocus mode, you can
adjust the focus manually.
Notes
• When the Wide AF area is used, the center area is used for focusing; when the Zone
AF area is used, a typical area of the selected area is used; and when the Local AF
area is used, an area that is selected with the multi-selector is used.
• When using a tele converter (sold separately), etc., rotation of the focusing ring may
not be smooth.
• The correct focus in the viewfinder is not achieved if the diopter is not adjusted
properly in viewfinder mode (page 35).
• Make sure to set the focus mode dial to MF for manual focus. Do not rotate the
focusing ring without setting to MF. Rotating the focusing ring forcibly without
switching to MF may damage the focusing ring (Except for lenses that are equipped
with the Direct manual focus function.).
Manual focus
1 Set the focus mode switch on the
lens to MF.
2 When the lens is not equipped
with the focus mode switch, set
the focus mode dial on the
camera to MF.
3 Rotate the focusing ring of the
lens to achieve a sharp focus.
Focusing
ring