Sony SNC-CH140 Security Camera User Manual


 
Preparation
Assigning the IP Address to the Camera
12
4
Select Off in the General tab.
The cameras will be displayed in the list.
If you want to keep Windows Firewall On, continue
with the following steps.
5
Select the Exceptions tab.
6
Click Add Program….
7
If the Add Program dialog appears, select SNC
toolbox and click OK.
SNC toolbox is added to the Program or port list.
8
Click OK.
When the above procedure is completed, the
cameras connected in the local network are
displayed in SNC toolbox.
When using Windows 7
Installing software
A warning message regarding the active contents may
appear when you install software such as SNC toolbox
from the CD-ROM. In this case, operate as follows:
Example: In case of SNC toolbox
If the pop-up “AutoPlay” appears when a CD-ROM is
inserted into the CD-ROM drive, click Install or run
program from your media.