Filter
Top Products
GB
12 Assigning the IP Address to the Camera
The setting items for the Cable Modem,
xDSL or PSTN are the same as those on
the Network Setting page of the
Administrator menu, which is displayed
on the Web browser. See “Configuring
the Network – Network Setting Page” in
the Operating Instructions stored in the
supplied CD-ROM.
8 Click Next.
The <HTTP Port & Video Server Port>
window appears.
9 Set the items.
Web Server TCP Port: Type the TCP
port number (1 to 65535) used to
access the camera and for the camera
to transmit the data. The default
setting is 80.
Video Server TCP Port: Type the TCP
port number (1 to 65535) used for the
camera to transmit the shot images.
The default setting is 8080.
You cannot set the same port number for
both ports.
10
Click Next.
The <Administrator’s Login ID &
Password> window appears.
11
Type the Administrator’s User
ID and Administrator’s
Password up to 9 characters.
The default settings of the
Administrator’s User ID and
Administrator’s Password are “admin.”
We recommend that you change them.
12
Click Finish.
The Complete Configuration dialog
appears.
13
Click OK.
The IP address of the camera in the list
changes, and the setup is completed.
Note
Note