Filter
Top Products
GB
16 Installing the Camera
Do not loosen the flange focal length
adjustment ring excessively. The ring
may be damaged if you loosen it until
the silver base of the ring appears.
7 Repeat steps 3 to 6 until you
achieve sharp focus both in the
telephoto and wide-angle
positions.
8 Tighten the fixing screw using
the hexagonal wrench.
When the supplied vari-focal lens is
replaced
1 Point the camera to a subject
about 20 cm (8 inches) away.
A subject, on which you can observe the
focus condition distinctively, such as
letters, fine patterns, etc, is suitable.
2 Turn the zoom ring of the lens
fully to WIDE.
3 Turn the focus ring of the lens
fully to
∞ (infinite).
4 Loosen the fixing screw using
the supplied hexagonal wrench,
and turn the flange focal length
adjustment ring until the correct
focus is obtained.
5 Tighten the fixing screw using
the hexagonal wrench.
Note
Hexagonal wrench
(supplied)
Flange focal length
adjustment ring
This way
Silver base
Not this way
Hexagonal wrench
(supplied)
Flange focal length adjustment ring