Filter
Top Products
17
GB
Connecting to a Network
Installation and Connections
When you want to replace the supplied lens
with a new one, CS-mount lenses with the
following lens mount surface can be
attached to the camera.
• Be sure to use a lens whose projected part
from the lens mount surface is less than 6
mm. Mounting a lens with a projected part
greater than 6 mm may damage the
internal mechanism of the camera.
• Be sure to use a lens whose mass is less
than 250 g (9 oz). If you choose to use a
heavier lens, secure it separately from the
camera.
Connecting to a
Network
When the camera installation and
adjustments are completed, connect it to a
network.
You can connect the camera to a network, in
two ways:
• Using the 10BASE-T port
•Using the USB port
For the connection to a local network, see
“Connecting the Camera to a Local
Network” on page 10.
For the connections using a cable modem,
xDSL modem or USB modem, see the
Operating Instructions stored in the
supplied CD-ROM.
Applicable Lens
Notes
6 mm
or less
Lens mount surface