Filter
Top Products
117
Customizing your camcorder
Changing the SETUP display
Icon/Item
OTHERS
REMAIN
Notes
•If you press DISPLAY/BATT INFO with [DISPLAY] set to [V-OUT/LCD] in the SETUP display,
the picture from a TV or VCR will not appear on the LCD display even when your camcorder is
connected to outputs on the TV or VCR.
•If more than five minutes passes after removing the power source, the [PROGRAM AE], [FLASH
LVL], [WHT BAL], [COMMANDER], and [HiFi SOUND] settings are returned to their factory
settings. Other settings are held in memory even when the battery is removed.
Tip
When recording a close subject, if [REC LAMP] is set to [ON], the red camera recording lamp on
the front of the camcorder may reflect on the subject. In this case, it is recommended to set [REC
LAMP] to [OFF].
Option
z AUTO
ON
Meaning
To display the remaining capacity of the disc in
the following cases for example:
• For 8 seconds after setting the power on and the
mode dial to (Movie) or (Still).
• For 8 seconds after recognizing the inserted disc
into your camcorder in (Movie) or (Still).
• For 8 seconds when set the display to on by
pressing DISPLAY/BATT INFO in (Movie) or
(Still).
• When the remaining capacity of the disc is less
than 5 minutes in (Movie) or 20 in (Still)
• For 8 seconds when starting recording from the
line input.
To always display the remaining capacity of the
disc.
Mode dial
Movie
Still
Play/Edit