Filter
Top Products
46
Using the NightShot Light
The picture will be clearer with the NightShot
Light on.
NightShot Light rays are infrared and so are
invisible. The maximum shooting distance
using the NightShot Light is about 3 m (10
feet).
To enable the NightShot Light, set
(CAMERA SET) – [N.S.LIGHT] to [ON] in the
SETUP display.
The default setting is [ON].
Using Color Slow Shutter
Color Slow Shutter enables you to record color
images in a dark place.
Color Slow Shutter may not work normally in
total darkness.
1 Set the mode dial to (Movie).
2 Slide the NIGHTSHOT PLUS switch to
OFF.
3 Press COLOR SLOW S.
The and [“COLOR SLOW SHUTTER”]
indicators flash on the LCD display.
To cancel Color Slow Shutter
Press COLOR SLOW S again to make the
indicator disappear.
Notes
•You cannot use Color Slow Shutter to record
still images.
•While using Color Slow Shutter, the shutter
speed is automatically adjusted depending
on the brightness. At this time, the motion of
the picture may slow down.
•While using Color Slow Shutter, you cannot
use the following functions:
– Fader
– Exposure
– Digital effect
– PROGRAM AE
Shooting in the dark – NightShot plus, etc.