Filter
Top Products
Superimposing a still image in the "Memory Stick" on an image
- MEMORY MIX
Before operation
• Insert a tape fur recording into your camcorder.
• Insert a "Memory Stick" with recorded still images into your camcorder.
(1) Set the POWER switch to CAMERA.
(2) Press MEMORY MIX.
The last recorded or last composed image appears on the lower part of the
screen as a thumbnail image.
(3) Press MEMORY /+ to select the still image you want to superimpose.
MEMORY :To display the previous image
MEMORY + :To display the following image
(4) Select the desired mode with the SEE/PUSH EXEC dial.
The mode changes as follows:
M, CHROM ,,-* M. LUMI ,,-* C. CHROM ,,-* M. OVERLAP
(5) Press the SEL/PUSH EXEC dial.
The still image is superimposed on the moving picture.
(6) Turn the SEE/PUSH EXEC dial to adjust the effect.
M. CHROM Blue chroma key {blue background} to extract a still image
and superimpose it on a moving picture
M. LUMI Brightness level used when extracting a still image and
superimposing it on a moving picture
C. CHROM Blue chroma key {blue background) to extract a moving
picture and superimpose it on a still image
M. OVERLAP No adjustment necessalTf
The fewer bars there are on the screen, the stronger the effect.
(7) Press START/STOP to start recording.
3
o
o
o
121