Filter
Top Products
Superimposing a still image in the "Memory Stick" on an image
- MEMORY MIX
3
4 5 6
Still image
To change the still image to superimpose
Do either of the following:
Press MEMORY /+ before step 6.
Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4.
(except for M. OVERLAP)
To change the mode setting
Press the SEL/PUSH EXEC dial before step 6, and repeat the procedure from step 4.
(except for M. OVERLAP)e
To cancel MEMORY MIX
Press MEMORY MIX.
Notes
• You cannot use tile MEMORY MIX function for moving pictures recorded on
"Memory Stick's.
• When the overlapping still image has a large amount of white, the thumbnail image of
the picture may not be clear.
Image data modified on your computer or shot with other equipment
You may not be able to play back modified images with your camcorder.
When you select M. OVERLAP
You cannot change the still image or the mode setting.
During recording
You cannot change the mode setting.
To record the superimposed image as a still image
Press PHOTO deeper in step 7.
Before operation, select PHOTO REC in _[_ to TAPE in tile menu settings (p. 177).
122