Filter
Top Products
Connecting your camcorder to your
computer using the USB cable
- For Macintosh users
- Except DCR-TRV16
When connecting to a computer using the USB cable
You must install a USB driver onto your computer in order to connect the camcorder to
the computer's USB jack. Tile USB driver can be found on the CD-ROM supplied, along
with the application software required for viewing images.
O8:
Mac OS 8.5.1/8.6/9.0/9.1/92 or Mac OS X (vl0.O/vl0.1)
Standard installation is required.
However, note that the upgrade to Mac OS 9.0/9.1 should be used for the following
models.
iMac with the Mac OS 8.6 standard installation and a slot loading type CD-ROM drive
iBook or Power Mac G4 with the Mac OS 8.6 standard installation
The USB jack must he provided as standard.
QuickTime 3.0 or newer must be installed to play back moving pictures.
Notes
• Operations are not guaranteed for the Macintosh environment if you connect two or
more wsg equipment to a single computer at the same time, or when using a hub.
• Some equipment may not operate depending on the type of USBequipment that is
used simultaneously.
• Operations are not guaranteed for all the recommended computer environments
mentioned above.
• Macintosh and Mac OS, QuickTime are trademarks of Apple Computer Inc.
• All other product names mentioned herein may be the trademarks or registered
trademarks of their respective companies. Furthermore, "TM" and "c_"are not
mentioned in each case in this manual.
DO not connect the USB cable to your computer before installation of the USB ]
driver is completed.
J
For Mac OS 9.1/8.2/Mac OS X (v10.0/v10.1)
The USB driver does not have to he installed. Your camcorder is automatically
recognized as a drive just by connecting it to your Mac using the USB cable.
For Mac OS 8.5.1/8.6/9.0 users
(1) Turn on your computer and allow the Mac OS to load.
(2) Insert the supplied CD-ROM in the CD-ROM drive of your computer.
The application software screen appears.
g
g
,,<
o
.=
o
171