Speco Technologies DVR-4TN Camcorder User Manual


 
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
101
5.9.6 Digital Signature
The Digital Signature function enables the user to export a video clip with the
unit’s unique signature key. It aims to authenticate a video clip exported from
the unit and prove it has not been modified. The user can export a video clip
with or without a digital signature file (*.sig). Set the item to <YES> to export
with the signature file, or <NO> to export without the signature file.
Make sure that you have an external storage device, such as a USB Hard
Drive or USB ThumbDrive
®
, available and connected to the appropriate port
for export.
For more information on verifying digital signature, see Appendix E: Verifying
Digital Signature.
5.9.7 Erase Disc
This function is used to remove information found on a CD-RW or DVD+RW
disk prior to exporting new information to the drive. Select <YES> and press
ENTER to start deleting data.
NOTE: This menu item will be grayed out when selected device is not
a CD/ DVD recorder or not select yet.
5.9.8 Begin Export
Select <YES> and press ENTER to start exporting.
5.10 Shutdown
This item is used to shut down or reboot the unit. If you must shut down the
DVR-4TN/8TN/16TN/16TS/16TT series unit for any reason, please use the
proper shut down and power up procedures to avoid damage to your unit.
Select <Shutdown> in Main menu and press ENTER to access the Shutdown
menu, which displays as follows.
Shutdown
1. Power Off
2. Reboot
Execute
Execute