Filter
Top Products
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
96
NOTE: Before removing external devices from the unit, remember
to remove the device from database.
5.8 Configuration
The Configuration menu can be used to restore the default factory settings,
import and export configurations.
Select <Configuration> from the Main menu and press ENTER. The following
menu is displayed.
Configuration
1. Load Factory Default
2. Import Config
3. Export Config
NO
Items in this menu are described in the following subsections.
5.8.1 Load Factory Default
This item is used to load the factory default setting; select <YES> to recall the
factory default setup configuration from the “read-only” memory, or <NO> to
cancel.
5.8.2 Import Configuration
This item allows the user to load a unit configuration that was saved on an
external drive. To import a configuration that was previously exported, make
sure the device that saved the configuration is connected to the unit. Select
<Import Config> from the Configuration menu and press ENTER. The
following menu is displayed.
Import Config
Config Name
xxxx-xxxx
xxx-xx
Select
NO
NO
Press UP / DOWN to select one of the available listed configuration files, and
choose <YES> to start to import.