User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
45
4.6.2 Dome Protocol Setup
The Dome Protocol menu item lists the dome protocols available for
communicating with dome cameras connected to the
DVR-4TN/8TN/16TN/16TS/16TT series unit. From the Main menu, select
<Camera Setup> and press ENTER. The following menu is displayed.
Camera Setup
1. Camera Select
2. Dome Protocol
3. Dome ID
4. Camera Title
5. Covert
6. Termination
7. Brightness
8. Contrast
9. Saturation
10. Hue
11. Audio Association
CH1
None
0
NO
NO
0
0
0
0
Both
To configure dome protocol, first select a camera then set the communications
protocol associated with that dome camera using the Direction keys and press
ENTER. The available protocols include <Speco>, <Pelco D>, <Pelco P>,
<AD422>, <Fastrax 2> and <None> (default).
NOTE: The settings become effective after saving the changes and
exiting from the menu.
4.6.3 RS485 Setup
The DVR-4TN/8TN/16TN/16TS/16TT series unit controls the domes via
RS-485 communication protocol. The RS-485 parameters in the
DVR-4TN/8TN/16TN/16TS/16TT series unit must be set to the same
parameters as the protocol used in the RS-422 setup for the dome.