Speco Technologies DVR-4TN Camcorder User Manual


 
User’s Manual
DVR-4TN/8TN/16TN/16TS/16TT Series
SPECO TECHNOLOGIES 01/06
82
5.4.1 Record Mode
This item is for you to preset the resolution and recording rate of normal
record and event record. The relative record settings, such as uration, will
follow the record mode setting. The offered options are <720×480@30PPS>,
<720 × 240@60PPS> and <360 × 240@120PPS> in NTSC (<720 ×
576@25PPS>, <720×288@50PPS>, <360×288@100PPS>in PAL).
Move the cursor to this item and press ENTER, then select a Record mode
using UP / DOWN keys.
NOTE: After changing the Record Mode setting, the warning message
“This will FORMAT ALL HARD DISKS and LOAD THE FACTORY
DEFAULT CONFIG!” will be shown on the screen. Press ENTER to
confirm the selection, then the unit will start to format the hard disks
and load the factory default settings, or press ESC to abort.
We strongly recommend backing up your programmed configuration
before making any changes on Record Mode settings.
5.4.2 Schedule Setup
This submenu is used to set the day and night time, or weekend recording
schedule.
The Night and Day schedules are used to define daytime and nighttime; the
Weekend schedule is tailored for weekends and holidays.
Select <Schedule Setup> from the Record Setup menu and press ENTER;
the following menu is displayed.
Schedule Setup
1. Day Time Start
2. Day Time End
3. Night Time Start
4. Night Time End
5. Weekend Schedule
6. Weekend Start
7. Weekend End
06:00
18:00
18:00
06:00
YES
Fri 18:00
Mon
06:00