Filter
Top Products
User’s Manual
DVR-4TN/8TN/16TN/ 16TS/16TT Series
SPECO TECHNOLOGIES 01/06
97
NOTE: If the imported configuration has a different record mode from
the unit’s, the warning message “This config has different record mode.
This will FORMAT ALL HARDDISKS.” will show.
NOTE: Remove the ThumbDrive
®
used for importing
configuration after the unit restarts, or it will be formatted as well.
5.8.3 Export Configuration
The Administrator is allowed to save a unit configuration by exporting it to an
external drive, such as a USB Flash Drive. Before exporting the configuration,
make sure the device in which the configuration will be saved is attached to
the unit properly. Select <Export Config> from the Configuration menu and
press ENTER. The following menu is displayed.
Export Config
1. Copy Destination
2. Config Name
3. Begin Export
NO
Items in this menu are described in the following sections.
5.8.3.1 Copy Destination
Select this item to list available destinations (external memory devices) to
which the configuration can be exported. Press UP / DOWN to set a
destination. Please note that saving a different configuration to the same
copy destination with the same file name will overwrite the previous
configuration file without warning.
NOTE: Users are not allowed to select any CD-R/W or DVD+RW as a
copy destination, including built-in CD-R/W and DVD+RW.
5.8.3.2 Configuration Name
This item allows the user to assign the exported configuration file a name. Use
the virtual keyboard to enter the configuration file name.
Note that the file name can contain up to 15 characters, with no spaces.