Filter
Top Products
Making Video available from the Internet
If your LAN is connected to the Internet, typically by a Broadband Gateway/Router and Broadband modem, you can make the
Network Camera available via the Internet. You will need to configure your Router or Gateway to allow connections from the Internet
to the camera.
Router/Gateway Setup
Your Router or Gateway must be configured to pass incoming TCP (HTTP) connections (from Internet Viewers) to the Network
Camera. The Router/Gateway uses the Port Number to determine which incoming connections are intended for the Network Camera.
This feature is normally called Port Forwarding or Virtual Servers, and is illustrated below. The Port Forwarding/Virtual Server entry
tells the Router/Gateway that incoming TCP connections on port 1024 should be passed to the Network Camera. If necessary, check
the user manual for your Router/Gateway for further details.
Figure 18: Connecting via the Internet
The "Port" for the Port Forwarding / Virtual Server entry
above is the " Secondary Port" number specified on the
Network screen of the Network Camera.
19