Filter
Top Products
Stream Type
Select the desired video stream type. There might be either MPEG4 or Motion-JPG streaming type.
Setup Camera
Pages
Click this button to connect the Web-based interface of the Camera
Enable Trigger
Event
Check this if you want the Camera to have the feature enabled.
You can add the same Camera twice, once for the LAN, and
again for the Internet. This will allow viewing the camera
whether you are on the same LAN as the camera or in a remote
location.
Main Screen
You can view live video in the main screen. The built-in software can let you view up to 9 cameras on a single computer screen at one
central location.
The Icons allow you to control the cameras and video streams.
Channel (Camera) Selection.
Use this to select the desired Channel (Camera) by clicking on the top row. This panel also indicates the status of
the camera.
• The first column indicates if the camera is available.
Green indicates the camera is available.
Gray indicates that the camera is currently unavailable.
• The second column indicates if a recording is in progress.
Gray indicates no recording.
Red indicates recording is in progress.
• The third column indicates if Motion Detection is in progress.
Gray indicates this feature is not enabled.
Yellow indicates Motion Detection is in progress.
• The forth and fifth columns indicate if I/O port 1/2 is in On or Off mode.
Gray indicates this feature is not enabled.
Yellow indicates I/O port is in On mode.
Alert Log List.
It displays the list of alert logs, if any.
Preset Position. Select the desired Preset position.
Refresh. Update the Preset position list. This has no effect unless during the viewing session, another user or the
Camera Administrator has renamed one or more of the Preset positions.
Create Preset Points. Define (or re-define) a Preset position. The Camera Administrator can choose whether or
not this option is available.
Camera Patrol. Move through the Preset positions in the sequence defined by the Camera Administrator.
Setup. Click this button to open the Setup Window.
Playback. Click this button to open the Playback, which allows you to browse through the previously saved files.
58