Filter
Top Products
SVAT ELECTRONICS
now you can see
CLEARVU3 3
3.1 Camera Installation
1. Plug the 4 pin DIN female connection on the camera into the 4 PIN DIN male
connection on the 60ft video/power wire.
2. Match the two arrows on top of both connecting cables.
3. Plug the camera’s power supply into the power jack located on the 60ft video/
power wire.
4. Plug the camera’s power adapter into an AC outlet.
5. Connect the 60ft video/power wire’s male RCA plug to the VIDEO IN port of
your TV/ monitor/VCR/DVR.
6. If your VIDEO IN port is a BNC connection (common with DVR units), you will
need to attach the BNC to RCA adapter before connecting the camera.
3.2 Monitor Installation
1. Plug the “3.5mm to RCA (female) wire” into the AV1/IN port on the monitor.
2. Plug one end of an RCA wire into the DVR’s VIDEO OUT port. Plug the other
end into the female end of the 3.5mm to RCA (female) wire.
3. Ensure that the DVR is plugged in and powered on.
3.3 Audio Installation
1. If you have an audio supported camera or microphone with an RCA Audio Out
connection, you may connect it to the Audio In port on the DVR.
2. Connect an RCA audio wire (not included) to one of the Audio Out ports on the DVR.
3. Connect the other end to the Audio In port of your TV/monitor/speaker.