Filter
Top Products
CV1002DVR
8
SVAT ELECTRONICS
Now You Can See
3. Format Storage: Use the left and right buttons to select the drive you would like to
format (HDD or CF). Press the play button and select YES to confirm your selection.
4. Reset to Default: Pressing the play button will reset the PVR to its factory default settings.
5. Update Firmware: This device supports firmware upgrades. They may become
available from time to time at www.svat.com. First make sure the CF card that contains
the NEW VERSION file is inserted into the slot. Also make sure that the device is
plugged into the AC Adapter. Press the play button, and then select YES to confirm the
upgrade. The upgrade will take between 3-5 minutes. Do not remove the CF card or
unplug the AC Adapter during this time, as it could permanently damage your PVR.