SVAT Electronics CV1002DVR Security Camera User Manual


 
CV1002DVR
5
SVAT ELECTRONICS
Now You Can See
Installation - PVR
1. If you are using the HDD (sold separately), refer to section 9.1 for hard drive
installation and warnings.
2. If you are using the included CF card, insert it into the bottom slot of the PVR.
3. Insert the black end of the RCA adapter into the AV IN jack. Insert the yellow end into
the remaining yellow jack of the RCA/POWER cable connected to your camera. Since
the included camera does not have audio, there is no need to plug in the red or white
RCA plugs.
4. Insert the power adapter plug into the PVR, and the other end into the nearest AC
outlet.
Powering On
1. Power on your PVR by pressing and holding the power button for 2 seconds.
2. The welcoming screen will be displayed, then the PVR will enter live view mode. Your
camera’s image should be displayed.
Welcoming Image
Live View Mode