Filter
Top Products
CV1002DVR
16
SVAT ELECTRONICS
Now You Can See
8. HOW T
8. HOW T
O USE THE PVR PROPERL
O USE THE PVR PROPERL
Y
Y
We recommend that you read this chapter carefully before use. The manufacturer
disclaims any liability for damage which may result as a consequence of improper use or
use contrary to the instructions contained herein:
Environmental Conditions:
1. Do not use PVR in humid or dusty environments:
2. Do not expose this product to direct sun or high temperatures, such as a closed car in
summer
.
3. High vibration or strong magnetic places, such as a car- charger or magnet.
4. When user moves from cold to warm places, it may cause misting on LCD panel. If
this occurs, switch off your PVR. You may switch on after 1 hour.
Connecting to PC:
1. While the unit is connected via USB to a computer, you will probably not be able to
read external hard drive and external CF memory card at the same time. Make sure that
only one external device is connected to the machine while connected to a PC.
2. While you format the storage device of PVR, the directory (and file) will be produced
automatically
. Remove the related files to the referred directory
3. If you use PC to format the external storage device through USB connection, select
the FAT32 format.
4. Do not run the files of the external storage device on the PC directly, while
you connect the device to it. First copy the files to the PC hard drive.
How to clean:
1. To wipe off the dust on the LCD display, use a soft dry cloth and wipe it gently. If there
is dirt, you can use a bit soft cleaning detergent.
2. Do not use abrasive materials to clean or scrape of
f the LCD display, because the
LCD display is easily damaged.
3. Always use soft dry cloth to clean the machine. Do not use volatile liquid, because this
may cause deformation and painting peeling.
Others:
1. Do not try to heat, hit or disassemble this machine and its battery. This behavior will
cause damage of this device and is dangerous.
2. Do not try to dissemble the device because it may cause electrical accident.
Any
inspections and repair task have to be conducted by official dealers or manufacturer.
3. Do not place any heavy good over this device during use or charging, as it may cause
burns due to overheating.