Filter
Top Products
CV1002DVR
6
SVAT ELECTRONICS
Now You Can See
1. MAIN SETUP
1. MAIN SETUP
Under live view mode, you can press SETUP key to enter the page of setting up basic
functions. Then, press ESC key to enable your setting and back to live view mode. In the
page of main setup, please use RIGHT / LEFT button to select value for each option.
Some of them should be entered to submenu through pressing PLAY key. It will be
introduced in the following section.
1.1 Main setup page 1
1. Resolution: Use the left and right buttons to select the desired resolution (352x240,
704/240). A higher resolution will result in better video quality but will increase video file
size.
2. Quality: Use the left and right buttons to select the desired video quality
(Low/Medium/High). Higher quality video will result in larger file sizes.
3. Rec Time: Use the left and right buttons to select the desired recording time (from 1-4
hours). For example, if you choose a value of 2, your PVR will automatically stop
recording after 2 hours. Select CANCEL
to record continuously.
4. Display: The video display can be switched between LCD display and TV display
(when the PVR is connected to the
TV). This setting can be reset by powering the unit
off, and then on. Refer to Section 1.2 for more information.
5. TV Out: Select between NTSC and PAL video standard. NTSC is the standard used in
North America.