Filter
Top Products
112
Resetting the date and time
The date and time are set at the factory. Set the time according to the local time in your
country. If you do not use your camcorder for about four months, the date and time
settings may be released because the vanadium-lithium battery installed in your
camcorder will have been discharged (p. 157).
First, set the year, then the month, the day, the hour and then the minute.
(1) Press MENU to display the menu in the standby mode.
(2) Turn the SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn the SEL/PUSH EXEC dial to select CLOCK SET, then press the dial.
(4)
Turn the SEL/PUSH EXEC dial to adjust to the desired year, then press the dial.
(5) Set the month, day and hour by turning the SEL/PUSH EXEC dial and
pressing the dial.
(6) Set the minute by turning the SEL/PUSH EXEC dial and pressing the dial by
the time signal. The clock starts to move.
(7) Press MENU to make the menu settings disappear.
The year changes as follows:
If you do not set the date and time
“- -:- -:- -” as time, and “- - - - - - - - -” as date will be recorded.
Note on the time indicator
The internal clock of this camcorder operates on a 12-hour cycle.
•12:00 AM stands for midnight.
•12:00 PM stands for noon.
SETUP MENU
CLOCK SET
LTR SIZE
RETURN
2
4
1,7
3
SETUP MENU
CLOCK SET
LTR SIZE
RETURN
6
SETUP MENU
CLOCK SET
LTR SIZE
RETURN
SETUP MENU
CLOCK SET
LTR SIZE
RETURN
JAN
1 2000
12:00:00
AM
2000
JAN
1
12 00
AM
JUL
4 2000
5:30:00
PM
2000
JUL
4
5 30
PM
2000
JAN
1
12 00
AM
[
MENU
]
:
END
[
MENU
]
:
END
[
MENU
]
:
END
[
MENU
]
:
END
MENU
TC/UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB T
I
ME
[
MENU
]
:
END
2000
JAN
1
12 00
AM
1995 1996 20792000