The Lenbrook Group DSR-PD150 Camcorder User Manual


 
88
Notes
New sound cannot be recorded on a tape already recorded in Fs48K mode (p. 109).
New sound cannot be recorded on a tape already recorded in the DV format.
You cannot add audio with the DV IN/OUT jack.
If you make all the connections
The audio input to be recorded will take precedence over others in the following order.
AUDIO CH1/CH2 jacks
INPUT1/INPUT2 connectors
If an i.LINK cable (DV connecting cable) (not supplied) is connected to your
camcorder
You cannot add sound to a recorded tape.
If you set the write-protect tab of the tape to lock
You cannot record on the tape. Slide the write-protect tab to release the write protection.
We recommend that you add new sound on a tape recorded with your camcorder
If you add new sound on a tape recorded with another camcorder (including an other
DSR-PD150), the sound quality may deteriorate.
On blank portions
You cannot add an audio.
When dubbing through the INPUT1/INPUT2 connectors
You can adjust the recording level manually (p. 52).
Audio dubbing