Filter
Top Products
47
Advanced Recording Operations
Shooting with the zebra pattern
You can set the camcorder to display a zebra pattern (diagonal stripes) in the portion of
the picture on the LCD screen or in the viewfinder with a subject whose brightness
exceeds a certain level. When the ZEBRA selector is set to 100, the portion of the picture
where zebra pattern appears is an area of high brightness and overexposure. You can
check the picture level of a subject by displaying the zebra pattern. Use the zebra
pattern as a guide for adjusting the exposure and shutter speed so that you can get the
desired picture.
Set the ZEBRA selector to 70 or 100 in standby or memory mode.
Setting
70
100
OFF
To erase the zebra pattern
Set the ZEBRA selector to OFF.
Note on shooting with the zebra pattern
Even though you see the zebra pattern on the LCD screen or in the viewfinder, the
zebra pattern is not recorded.
Shooting with manual adjustment
Meaning
The zebra pattern appears in the portion of the picture on the LCD screen
or in the viewfinder with a subject whose brightness is about 70 IRE.
The zebra pattern appears in the portion of the picture on the LCD screen
or in the viewfinder with a subject whose brightness exceeds more than
100 IRE.
The zebra pattern does not appear on the LCD screen or in the viewfinder.
ZEBRA
OFF
70
100