The Lenbrook Group DSR-PD150 Camcorder User Manual


 
14
Step 2 Preparing the power supply
Connecting to a wall outlet
When you use your camcorder for a long time, we recommend that you power it from a
wall outlet using the AC power adaptor.
(1) Open the DC IN jack cover and connect the AC power adaptor to the DC IN
jack on your camcorder with the plugs v mark facing toward the LCD panel
side.
(2) Connect the power cord to the AC power adaptor.
(3) Connect the power cord to a wall outlet.
Precaution
The set is not disconnected from the AC power source (house current) as long as it is
connected to the wall outlet, even if the set itself has been turned off.
Notes
The power cord must only be changed at an authorized service shop.
AC power adaptor can supply power even if the battery pack is attached to your
camcorder.
The DC IN jack has source priority. This means that the battery pack cannot supply
any power if the power cord is connected to the DC IN jack, even when the power
cord is not plugged into a wall outlet.
Using a car battery
Use the Sony DC Adaptor/Charger (not supplied).
1 2,3