Filter
Top Products
92
Setting the user bits value
You can set the user bits as eight-digit hexadecimal values (base 16) to have the date,
time, scene number, and other information inserted into the time code.
(1) Set the POWER switch to VCR or CAMERA.
(2) Press MENU to display the menu.
(3) Turn the SEL/PUSH EXEC dial to select TC, then press the dial.
(4) Turn the SEL/PUSH EXEC dial to select UB PRESET, then press the dial.
(5) Turn the SEL/PUSH EXEC dial to select PRESET, then press the dial.
(6) Set up the first two digits. Turn the SEL/PUSH EXEC dial to select the
number, then press the dial.
(7) Repeat step 6 to set up the other digits.
(8) Turn the SEL/PUSH EXEC dial to select SET, then press the dial.
To cancel the user bits setting
Select CANCEL in step 8, then press the SEL/PUSH EXEC dial.
To reset the user bits
Select RESET in step 5, then press the SEL/PUSH EXEC dial.
Setting the user bits to the real time clock
Set UB TIME to ON in the menu settings. We recommend that you set the time
beforehand.
Setting time values
3-8
TC/ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TI ME
[MENU] : END
TC/ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TI ME
RETURN
[MENU] : END
00 00 00 00
RESET
PRESET
RETURN
2
1
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
MENU
TC/ UB SET
TC PRESET
UB PRESET
TC FORMAT
TC RUN
TC MAKE
UB TI ME
RETURN
[MENU] : END
00 00 00 00
SET
CANCEL