The Lenbrook Group DSR-PD150 Camcorder User Manual


 
66
Searching the boundaries of recorded
tape by title Title search
If you use a tape with cassette memory, you can search for the boundaries of
recorded tape by title (Title search) (p. 142). Use the Remote Commander for
this operation.
(1) Set the POWER switch to VCR.
(2) Set CM SEARCH in
to ON in the menu settings (p. 104). The default setting
is ON.
(3) Press SEARCH MODE on the Remote Commander repeatedly, until the title
search indicator appears.
The indicator changes as follows:
INDEX SEARCH t TITLE SEARCH t DATE SEARCH t PHOTO SEARCH
t PHOTO SCAN t no indicator
(4) Press . or > on the Remote Commander to select the title for playback.
Your camcorder automatically starts playback of the scene having the title that
you selected.
To stop searching
Press x.
If you use a tape without cassette memory
You cannot superimpose or search for a title.
In the mark
The bar in the mark indicates the present point on the tape.
The mark in the indicates the actual point you are trying to search for.
If a tape has a blank portion between recorded portions
The title search function may not work correctly.
3
4
1
POWER
OFF
(CHG)
CAMERA
MEMORY
VCR
SEARCH
MODE
TITLE SEARCH
1 SCENE1
2 SCENE2
3 SCENE3
4 SCENE4
5 SCENE5
6 SCENE6
TITLE SEARCH
3 SCENE3
4 SCENE4
5 SCENE5
6 SCENE6
7 SCENE7
8 SCENE8