Filter
Top Products
31
13.1. Connection example
Connections to the network system differ depending on the devices to be used.
For details, refer to the descriptions about system examples in the setup manual.
N-SD2000
Software Decoder
N-CC2564 Network
Combination Dome Camera
To 24 V AC
Switching HUB
To AC
12345678
DC-IN
: 10BASE-T/100BASE-TX
: 100BASE-TX/1000BASE-T
14. INITIALIZATION
Return the set contents to default conditions.
1. Either press the RESET switch or switch on the power again while holding down the INITIALIZE switch.
2. Continue to press the INITIALIZE switch until the Ready indicator on the switching hub lights.
Note
To return the camera settings to default conditions, execute it in the camera menu screen. For details, refer to
the setting manual.
Note: Shielded (STP) network cables must be used with this unit to ensure compliance with EMC standards.