Filter
Top Products
62
SMART Alert
1. Set up the General and Users tabs first.
2. Select Enable SMART Alarm.
3. Define the frequency of SMART status checks (in hours).
4. Select the type of SMART event to trigger an action.
5. If selecting for temperature checks, define the maximum HDD
temperature.
Note Recommend 65˚C/150˚F if using Temperature Threshold.
6. Select an Action Method: Beep Alert, Popup Message Alert, or
Email Alert.
7. Add a Comment that will be seen in the email message if desired.
8. When you are finished, click Apply then Close.
Alarm Event
1. Set up the General and Users tabs first.
2. Select Use Email Alarm.
3. Define the frequency to send email alerts (in minutes).
4. Select the Event Type: Motion, Sensor, No Signal (video loss).
5. Select With Detail Info to receive a still image attachment of the
associated camera in the email message.
6. Max Count defines the number of message that will contain detailed
data within the frequency time frame.
7. Add a Comment that will be seen in the email message if desired.
8. When you are finished, click Apply then Close.
MySurveillix
1. Set up the General and Users tabs first.
3. Select My Surveillix.
4. Select Use MySurveillix.
5. Define the Send Time to designate the time the recorder will
send updates to MySurveillix.
6. Enter a numeric Security Code if desired (this is an additional
security measure to prevent unauthorized users from adding
the recorder to their MySurveillix account).
7. Select Send notification to MySurveillix on alarm events if
you want the recorder to report alarm events to MySurveillix.
8. When you are finished, click Apply then Close.